35P
- Pneumatic actuator
- Pressure independent primary airflow control
- Adjustments are easily accessible through ceiling opening
- Energy efficient fan motor, permanent split capacitor type mounted with vibration
isolators
- 3/4" Dual density insulation, coated to prevent air erosion, meets requirements of
NFPA 90A and UL 181
- Heavy gauge, galvanized steel casing with leak resistant construction
- Removable Panels on all Four (4) Sides
- Rectangular discharge opening is designed for flanged duct connections
- Intake air filter, 1" thick disposable
- Fan unit fusing
- Fan disconnect switch
- Discharge back draft damper
- Controller set for Direct Acting / Normally Open
- 2-row hot water coil available as an accessory
Available sizes:
| Unit Size |
Inlet Size |
Primary CFM Range |
Fan CFM @ 0.3" wg |
Voltage |
| Downstream Static (No Coil) |
| 2 |
8 |
0-1000 |
285-680 |
120/1 or 270/1 |
| 3 |
10 |
0-1425 |
400-880 |
120/1 or 277/1 |
| 4 |
12 |
0-2100 |
680-1620 |
120/1 or 277/1 |
| 5 |
14 |
0-2950 |
830-1920 |
120/1 or 277/1 |
| 6 |
16 |
0-3950 |
1315-2550 |
120/1 or 277/1 |
Replacement Control Accessories:
- Pneumatic Actuator
- Johnson Pneumatic Actuator
- Speed Controller for 35P 277/1 Part #100533-01
- Speed Controller for 35P 120/1 Part #100553-01
- Nailor 3000 Controller
- Nailor 2000 Controller
| Hahn-Mason Home | Warehouse | Fans |